Turning-technologies Touch Board Bedienungsanleitung PDF herunterladen (Seite 9)

Touch Board Plus 8

Connecting the Video Projector

TIP

For optimal usage and viewing, the minimum

required screen resolution should be set at 1024 x

768.

With the computer turned on, connect the projector video

cable from the computer to the video projector.

Turn on the video projector.

With the video projector aimed at the Touch Board Plus, align

the projected image onto the Touch Board Plus so that it is

within the board's active area.

Connecting the Touch Board Plus

via USB

The Touch Board Plus connects to your computer via a USB cable. A separate power supply is not necessary since the Touch

Board Plus is powered through the USB connection.

Plug the USB cable into the USB port on the right side of the board.

Plug the other end of the USB cable into a working USB port on your

computer.

TIP

A powered USB hub may be used.

A red light at the bottom of the board indicates that the board is receiving

power through the USB cable. A blue light indicates the proximity of the

pen to the board.

Calibrating the Touch Board Plus via Device Manager

Recommended for OS X and Linux platforms, as well as PC users who need to recalibrate Touch Board Plus.

IMPORTANT

Linux users must calibrate the DualBoard in the Ubuntu GNOME environment. Refer to Installing

Ubuntu GNOME on page 5.

The steps below walk you through performing a calibration via Device Manager. Aside from using these steps on an OS X or

Linux platform, you can also perform them on a PC if you moved the Touch Board Plus. It is strongly recommended to

recalibrate the Touch Board if the board or projector has been moved.

NOTE

If an error occurs during the calibration process, end the process and start over.

From your computer, right click/control-click the Turning Technologies icon in the notification area (PC)/Menu

Extras area (Mac)/Applications (Ubuntu GNOME).

turningtechnologies.com/user-guides

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

Turning-technologies Touch Board Bedienungsanleitung Seite 9